X
SEE OUR

How to Tell If You Need Floor Refinishing and How is it Done?

Floor Cleaning Services

If you noticed that your hardwood floors have lots of scratches, turning pale or gray, some boards have already turned black and there is a sign of some water damage, then it is a good time for a floor refinishing. As per the article from BuildDirect, there are 13 most common wood flooring issues. It includes wear and tear, stains, fading, peeling finish, board gaps, water damage, scratches, cracks and debris in the finish.

Floor refinishing’s purpose is to restore the wood’s original appearance and shine, change its color or finish, or blend it with newly added wood. Refer to Forbes written article saying What to Know Before Refinishing Your Floors. When hardwood floors are already about 20 years old, it may start to show their age through scratches, dullness, paleness and discoloration. These are the obvious signs to hire a floor refinishing professional.

If you are thinking of floor refinishing as an option, you may ask yourself if there is a need to sand down to bare wood to get rid of the scratches. Luckily, This Old House says that you can clean and refinish hardwood floors without sanding down to the bare wood. That is if the scratches don’t go all the way through to the wood. In a few hours your hardwood floors will be good as new. The process is easier and less expensive than sanding them all to bare wood. The floor refinishing professional will just use a buffer to the floor and after that apply a fresh coat finish.

Forbes suggests who not to hire in floor refinishing. That is yourself. If you need a floor refinishing service in Chicagoland, NWI, Michiana, Fort Wayne, Kokomo, Indianapolis and surrounding areas, ease your worry with Club Clean.

Club Clean knows about floor refinishing that involves the following steps:

  • Floor Buffing – This involves the sanding off of the old finish. There is no need for too much sanding if the scratches and imperfections on the floor are very minimal.
  • Removal of all the Dust – All the dusts must be removed with the use of a vacuum and make sure to wipe the floor with a cloth. Removal of all dusts is critical in order to not have a rough and ugly floor.
  • First Coating and Final Coating – Application of the first coating must be in accordance with the directions of the finishing product. The finishing product will put on the label the instructions and the drying time between coats.

The above steps may look so simple but the process may involve some few other details such as the determination of the type of finish look you want to achieve. There are some necessary details that only the experts in floor refinishing are knowledgeable about how it is to be done in the proper and correct way to achieve the desired results.

A DIY floor refinishing isn’t advisable unless you know well how to do the job perfectly. You can save on the labor costs if you will do the job by yourself but mistakes can show up big time.

Club Clean can help you with floor refinishing. Save time and money with our floor refinishing service!

Dial 800-726-9007 for a Free Floor Refinishing Estimate Now!

What is Stalling your success today?